Traffic scenario classification can be used in multiple service scenarios to accurately optimize network parameters or take different management and control measures based on the specific scenario. For example, in intelligent operation and maintenance, different fault types can be identified based on the traffic performance caused by each fault. In intelligent congestion control, rate control parameters can be configured based on traffic performance to ensure high throughput, low delay, and no packet loss. However, the status parameters of traffic in different scenarios may not differ significantly due to limitations in the collection device. Moreover, the number of scenarios within a given duration is uncertain, and random switching between scenarios can make it difficult to identify them. In some real-time decision situations, a response time of milliseconds or even microseconds may be required, which presents a greater challenge in solving the problem.
During transmission and forwarding processes, network traffic may be sent to the same port queue by multiple ports. As the output rate of the forwarding device is limited by the port bottleneck bandwidth, the input rate of traffic is higher than the output rate, resulting in the need for the forwarding device to allocate cache space to store burst traffic. This creates a cache queue at the egress port of the forwarding device. The queue length in the cache queue changes based on different types of forwarding traffic. For example, queue flaps caused by different stream ratios and different loads are different. All these factors are different in various service types such as web search and distributed computing. As service layer applications change, the traffic characteristics received by the same queue also change. Currently, some status parameters, such as input rate (v_in), output rate (v_out), real-time length of the cache queue (q), and corresponding time (t), are collected at fixed time intervals. The output rate (v_out) is limited by the port bottleneck rate (v_max) where v_out <= v_max, while the input rate is affected by the burst and regulation protocol. So the maximum of input rate may be higher than the bottleneck rate. Here, the input and output rates are measured by the amount of traffic received and sent during each fixed time interval.
The objective of this challenge is to build a model based on the training set data to predict the traffic scenario for unknown traffic at each moment.Note: In this context, "unknown scenario" refers to a scenario with known traffic but unclear which of the known scenarios it belongs to, rather than a completely new scenario that has never occurred before.
About AI for Good - International Telecommunication Union (ITU)
AI for Good is organized by ITU in partnership with 40 UN Sister Agencies. The goal of AI for Good is to identify practical applications of AI to advance the United Nations Sustainable Development Goals and scale those solutions for global impact. It’s the leading action-oriented, global & inclusive United Nations platform on AI.
The error metric for this competition is Accuracy.
Due to the large size of the submission file please allow 15 minutes for scoring for each submission.
For every row in the dataset, submission files should contain 2 columns: ID and Target.
Your submission file should look like this:
ID Target
Test0_0 6
Test0_1 6
1st Place: $500 USD
2nd Place: $300 USD
3rd Place: $200 USD
There are 3 000 Zindi points available. You can read more about Zindi points here.
Participants are required to submit:
In evaluating the final submission, both the quality of the report (weighted 40%) and the achieved model score (weighted 60%) will be considered.
Competition closes on 10 September 2023.
Final submissions must be received by 11:59 PM GMT.
We reserve the right to update the contest timeline if necessary.
How to enroll in your first Zindi competition
How to create a team on Zindi
How to update your profile on Zindi
How to use Colab on Zindi
How to mount a drive on Colab
This competition is open to all.
Teams and collaboration
You may participate in competitions as an individual or in a team of up to four people. When creating a team, the team must have a total submission count less than or equal to the maximum allowable submissions as of the formation date. A team will be allowed the maximum number of submissions for the competition, minus the total number of submissions among team members at team formation. Prizes are transferred only to the individual players or to the team leader.
Multiple accounts per user are not permitted, and neither is collaboration or membership across multiple teams. Individuals and their submissions originating from multiple accounts will be immediately disqualified from the platform.
Code must not be shared privately outside of a team. Any code that is shared, must be made available to all competition participants through the platform. (i.e. on the discussion boards).
The Zindi data scientist who sets up a team is the default Team Leader but they can transfer leadership to another data scientist on the team. The Team Leader can invite other data scientists to their team. Invited data scientists can accept or reject invitations. Until a second data scientist accepts an invitation to join a team, the data scientist who initiated a team remains an individual on the leaderboard. No additional members may be added to teams within the final 5 days of the competition or last hour of a hackathon.
The team leader can initiate a merge with another team. Only the team leader of the second team can accept the invite. The default team leader is the leader from the team who initiated the invite. Teams can only merge if the total number of members is less than or equal to the maximum team size of the competition.
A team can be disbanded if it has not yet made a submission. Once a submission is made individual members cannot leave the team.
All members in the team receive points associated with their ranking in the competition and there is no split or division of the points between team members.
Datasets and packages
The solution must use publicly-available, open-source packages only. Your models should not use any of the metadata provided.
You may use only the datasets provided for this competition. Automated machine learning tools such as automl are not permitted.
If the challenge is a computer vision challenge, image metadata (Image size, aspect ratio, pixel count, etc) may not be used in your submission.
If external data is allowed you may only use data that is freely available to everyone. You must send it to Zindi to confirm that it is allowed to be used and then it will appear on the data page under additional data.
You may use pretrained models as long as they are openly available to everyone.
You are allowed to access, use and share competition data for any commercial,. non-commercial, research or education purposes, under a CC-BY SA 4.0 license.
Your solution must not infringe the rights of any third party and you must be legally entitled to assign ownership of all rights of copyright in and to the winning solution code to Zindi.
Submissions and winning
You may make a maximum of 10 submissions per day.
You may make a maximum of 300 submissions for this competition.
Before the end of the competition you need to choose 2 submissions to be judged on for the private leaderboard. If you do not make a selection your 2 best public leaderboard submissions will be used to score on the private leaderboard.
During the competition, your best public score will be displayed regardless of the submissions you have selected. When the competition closes your best private score out of the 2 selected submissions will be displayed.
Zindi maintains a public leaderboard and a private leaderboard for each competition. The Public Leaderboard includes approximately 20% of the test dataset. While the competition is open, the Public Leaderboard will rank the submitted solutions by the accuracy score they achieve. Upon close of the competition, the Private Leaderboard, which covers the other 80% of the test dataset, will be made public and will constitute the final ranking for the competition.
Note that to count, your submission must first pass processing. If your submission fails during the processing step, it will not be counted and not receive a score; nor will it count against your daily submission limit. If you encounter problems with your submission file, your best course of action is to ask for advice on the Competition’s discussion forum.
If you are in the top 10 at the time the leaderboard closes, we will email you to request your code. On receipt of email, you will have 48 hours to respond and submit your code following the submission guidelines detailed below. Failure to respond will result in disqualification.
If your solution places 1st, 2nd, or 3rd on the final leaderboard, you will be required to submit your winning solution code to us for verification, and you thereby agree to assign all worldwide rights of copyright in and to such winning solution to Zindi.
If two solutions earn identical scores on the leaderboard, the tiebreaker will be the date and time in which the submission was made (the earlier solution will win).
If the error metric requires probabilities to be submitted, do not set thresholds (or round your probabilities) to improve your place on the leaderboard. In order to ensure that the client receives the best solution Zindi will need the raw probabilities. This will allow the clients to set thresholds to their own needs.
The winners will be paid via bank transfer, PayPal, or other international money transfer platform. International transfer fees will be deducted from the total prize amount, unless the prize money is under $500, in which case the international transfer fees will be covered by Zindi. In all cases, the winners are responsible for any other fees applied by their own bank or other institution for receiving the prize money. All taxes imposed on prizes are the sole responsibility of the winners. The top 3 winners or team leaders will be required to present Zindi with proof of identification, proof of residence and a letter from your bank confirming your banking details.Winners will be paid in USD or the currency of the competition. If your account cannot receive US Dollars or the currency of the competition then your bank will need to provide proof of this and Zindi will try to accommodate this.
Payment will be made after code review and an introductory call with the host.
You acknowledge and agree that Zindi may, without any obligation to do so, remove or disqualify an individual, team, or account if Zindi believes that such individual, team, or account is in violation of these rules. Entry into this competition constitutes your acceptance of these official competition rules.
Zindi is committed to providing solutions of value to our clients and partners. To this end, we reserve the right to disqualify your submission on the grounds of usability or value. This includes but is not limited to the use of data leaks or any other practices that we deem to compromise the inherent value of your solution.
Zindi also reserves the right to disqualify you and/or your submissions from any competition if we believe that you violated the rules or violated the spirit of the competition or the platform in any other way. The disqualifications are irrespective of your position on the leaderboard and completely at the discretion of Zindi.
Please refer to the FAQs and Terms of Use for additional rules that may apply to this competition. We reserve the right to update these rules at any time.
Reproducibility of submitted code
Data standards:
Consequences of breaking any rules of the competition or submission guidelines:
Monitoring of submissions
Join the largest network for
data scientists and AI builders